| "Cut & Fill" Laser Rods |
|
Use this rod in cut and fill operations. The rod is color coded: red for cut and silver
for fill, with zero point in the middle. These rods are made from two heavy-duty, rectangular anodized aluminum telescoping sections, 8 ft. (2.4m) total length. Features a quick
clamp locking mechanism, and a spring loaded bottom shoe for ease of extension. Includes detector/receiver clamping bracket; an integrated bubble vial for plumb indication is available. |
|
| |
|
|
| Fiberglass Rod Telescoping (SVR Series) |
|
These rugged oval-shaped rods are waterproof, corrosion-resistant and
nonconductive, and feature an abrasive-resistant coating with special reinforcement
ribs to stop breakage and add stability. Easy-to-read graduations and a
special measuring scale on the backside permit users to read height at
eye level. Rods are equipped with reliable and unbreakable buttons that
lock each section. With stadia. |
|
| |
|
|
| Fiberglass Rod MeasureMark Telescoping |
|
| |
|
|
| Aluminum Rod Dual Face Telescoping |
| CST's telescoping aluminum rods are made of a light and durable aluminum
alloy. The anodized sections are imprinted with special weather resistant
and corrosion resistant inks. Tight tolerances on extruded aluminum sections
allow for smooth extension and prevent unnecessary clattering and sloppiness.
The sectional joints are injection molded from a durable lightweight impact-resistant
plastic. Rods are equipped with reliable and wear-resistant polycarbonate
buttons that lock each section. Easy-to-read graduations and a special
measuring scale on the backside permit users to read height at eye level. |
|
| |
| Aluminum Rod Telescoping |
|
| |
|
|
| Fiberglass San Francisco Rod |
| Frisco rods made of fiberglass reinforced plastic pultrusions are virtually
unbreakable and impervious to a wide range of chemicals and gases. High-contrast
graduations and numbers are bonded to a steel replaceable face to prevent
chipping. All fiberglass rods have metal faces and, therefore, are electrical
conductors. |
|
| |
|
|
| Fiberglass Philadelphia Rod |
| These Philadelphia rods are constructed of fiberglass reinforced plastic
pultrusions and are virtually unbreakable. Fiberglass will withstand chemical
corrosion from a vast range of corrosive liquids and gases. All rods feature
high-contrast graduations and numbers bonded to a steel replacement face
that prevents chipping. All fiberglass rods have steel faces and, therefore,
are electrical conductors. White face. Use target No. 07-410 or 07-411. |
|
|
| Laser Pole, Bayonet Type |
| Heavy duty aluminum extrusion is precisely machined to fabricate these
top of the line grade rods. All rods are impregnated with uneraseable black
graduations with foot markings and instant reading numbers in bright red. |
|
| |
| Laser Pole, Quik-Loc |
|
| |
| Rod Accessories |
|
|
