| Gate Wizard |
| Please answer the following questions to help us assist you with selecting the best gate for your needs. |
| First Name (Required): |
|
| Last Name (Required): |
|
| Email: |
|
| Phone (Required): |
|
| What is the type of the gate: |
|
| Is it a single or dual gate? |
|
| Approximate weight of each gate leaf (lbs.)? |
|
| Approximate length of each gate leaf (ft.)? |
|
How many cycles a day?
(cycle = a full open and close operation) |
|
| How many feet to the power source? Type "solar" if no power is available within 1000 ft. |
|
| When are you planning to purchase the gate opener? |
|
| If it is a SWING gate system, answer the following questions... |
| What is the size of the mounting post/column: (ex. 4"x4" or 4" diameter) |
|
What is the wind blockage factor?
Can the wind pass through the gate? |
|
| Is it a pull or push to open gate system? Will the opener pull the gate toward the property or push it away? |
|
| If it is a SLIDE gate system, answer the following questions... |
| What is the length of the opening (ft.)? |
|
| Is it cantilever (rolls on guide rollers, does not roll on ground) or V-Groove track? |
|
| Enter any additional comments and/or click Submit |
|
|
| Other aspects and features of automatic gate openers to consider... |
Which gate opener is right for my gate?
The following guide is a general guide to assist you in finding the right opener for your gate. Please keep in mind that each gate location and climate creates a unique situation particular to each application.
| DIY
MIGHTY MULE GATE OPENERS |
| Gate
Type |
Weight
and length
(per leaf) |
Frequency
of Use |
Gate
Operator |
Power
Requirements |
My
Gate is a
SWING Gate that
does not exceed: |
350 lbs
and 12 ft. |
lightweight |
Mighty
Mule 350 |
DC / Solar
Compatible |
| 500 lbs
and 16 ft. |
light to
moderate |
Mighty
Mule 500 |
DC / Solar
Compatible |
| 500 lbs
and 16 ft. |
dual
gate/moderate |
Mighty
Mule 502 |
DC / Solar
Compatible |
My
Gate is a
SLIDE Gate that
does not exceed: |
500 lbs
and 30 ft |
light to
moderate |
SL-1000B |
DC / Solar
Compatible |
| 1000 lbs
and 30 ft |
moderate
to heavy |
SL-2000B |
DC / Solar
Compatible |
| |
|
|
|
|
| PROFESSIONAL
GTO/PRO GATE OPENERS |
| Gate
Type |
Weight
and length
(per leaf) |
Frequency
of Use |
Gate
Operator |
Power
Requirements |
My
Gate is a
SWING Gate that
does not exceed: |
| 500 lbs
and 16 ft. |
light to
moderate |
PRO
SW-2500 |
DC / Solar
Compatible |
| 500 lbs
and 16 ft. |
dual gate/moderate
|
PRO
SW-2502 |
DC / Solar
Compatible |
| 650 lbs
and 16 ft |
moderate
to heavy |
PRO
SW-3000XL |
DC / Solar
Compatible |
| 1000 lbs
and 20 ft |
moderate
to heavy |
PRO
SW-4000XL |
DC / Solar
Compatible |
My
Gate is a
SLIDE Gate that
does not exceed: |
500 lbs
and 30 ft |
light to
moderate |
PRO
SL-1000B |
DC / Solar
Compatible |
| 1000 lbs
and 30 ft |
moderate
to heavy |
PRO
SL-2000B |
DC / Solar
Compatible |
|
Which accessories are right for my gate opener?
All current models of GTO's Mighty Mule E-Z gate openers and GTO/PRO's automatic gate operators are compatible with ALL GTO accessories. |
Solar power guide
How practical solar power is for your gate opener needs to be examined on a case-by case-basis. Factors to consider are: location of gate, type of gate, frequency of use, and how far the gate opener is from a power source etc.
Therefore, if you are within a 1000 ft of a power outlet, we recommend using the transformer that is included with your GTO gate opener. This will provide you with the most consistent charge than you would get from solar charging power. After all options are considered and it is determined that solar charging is your best option.— See charts below for the recommended number of solar panels based on your model, climate zone, and frequency of use.
The table and map below illustrate the maximum number of gate cycles to expect per day in a particular area when using solar charging panels with all GTO gate operators.
- Up to 15 Watts of solar charging power for models FM700, FM702 .
- Up to 30 Watts of solar charging power for models FM500, FM502 and FM350, PRO-SW1500, PRO-SW2500, PRO-SW3000, PRO-SW4000, PRO-SL1000B, PRO-SL2000B.
Installing an optional second battery is recommended for best performance of your gate opener.
|
What else will you need to install your automatic gate opener?
Other Materials You May Need...
Low voltage wire: (16 gauge, multi- stranded, dual conductor, direct burial wire) will be needed. Wire length depends upon which accessories used and the distance between the transformer power supply and gate. [1000 ft. (304 m) max.]
Solar Panels: If your gate is more than 1000 ft. (304 m) away from an AC 110V power source, Solar Panels must be used to trickle charge the battery.
Push to Open Bracket: If your gate opens out from your property, you need to purchase special order a "push-to-open" bracket. You can program the gate operator for this application. (Dual gates require 2 brackets)
Gate Reinforcement: If you have thin walled tube or panel gates, you will need to reinforce them.
Mounting Plate: Depending on the type of gates, a horizontal cross member or mounting plate may be needed to mount the opener arm and gate bracket to the gate.
Properly installed gate: Your gate must be in good working order, firmly hung on an anchored fence post, and able to swing freely and evenly. This operator WILL NOT WORK on gates with wheels or gates that drag on the ground.
Gates weighing more than 250 pounds require ball bearing hinges. (not provided by Mighty Mule).
Gate post(s) must be at least 4 inches square or 4 inches in diameter.
Gate post greater than 8 inches thick will require longer bolts than the ones provided to mount post brackets to the gate post.
|
| Access |
|
| |
Most gate operators offer remote control
transmitters and a receiver as part of gate opener packages. If remote transmitters are
not provided, you may purchase them separately, however, a radio
receiver is required to pick-up the signal from the transmitters.
The receiver can be purchased separately and is connected to the
accessory terminal on the control board of the gate operator. Other
access devices can also be used, such as a digital keypad, push
button, Telephone entry systems, card readers, exit sensors and so
on. |
| Exiting |
|
| |
How will your gate be opened from the
inside of your property when exiting? You may use your remote
transmitter to open the gate when exiting, but you may also use the
following devices:
Exit wand - A gate opening sensor buried
along side of the driveway that senses vehicles electromagneticly
and activates the gate to open automatically when a vehicle passes
by.
Keypads, push buttons, card readers - Access devices may
also be used as exiting devices. Exit Loops may be used, but must be buried in the driveway.
This is best for new construction. |
| Safety |
|
| |
If a vehicle, person, or object is in
the path of the gate, what kind of safety do you need when the
gate is closing or opening?
All UL approved gate operators have a safety
device feature built-in, so if your gate hits a car
or object, it will back up similar to the feature that garage doors
have. However, when a gate closes and hits and object, it may hit
with 14 pounds of force or greater. This safety feature may not be
recommended if you have a nice car (could cause dents or scratches),
small children (can still cause harm or injury), or
animals.
Other safety features offered in addition to the
built-in features would be:
Photo Eyes - Electric photo eyes
(just like garage door openers have) where a small device transmits
an infrared beam to another device on the other side. When something
is blocking the infrared beam the gate will stay open.
Loop
detector and loop wire - Loop wire can be buried underneath your
driveway, so that when your car is on top of the loop the gate will
stay open. The loop wire is then plugged into a loop detector which
is connected to your gate operator. Basic installation would be two
loop wires (one loop on the inside and one loop on the outside of
your gate) and one loop detector.
Reverse Edging - Edging
material such as "Miller Edge" where you attach to the edge of your
gate. It makes the gate more sensitive to the touch, so that when
you gate does close on a vehicle, person or object - it will come in
contact with the reverse edge first, thus, reducing the force of
impact. The gate will then reverse in direction when it comes in
contact with an obstruction. |
|
